The Selection And Installation Method Of Banded V-Belts

V Belts are widely used in agricultural machinery. The cross-section of the standardized V-belt is trapezoidal, and the whole circle has no joints. It is divided into seven types: O type, A type, B type, C type, D type, E type, and F type. increase.

When we choose the model of the V-belt, it should be compatible with the selected V-belt, otherwise the V-belt will appear abnormal in the pulley groove. When changing to the V-belt, it is best to bring the old one to the agricultural machinery department , in case you get the model number wrong.

So, how to install the V-belt correctly? Next, we will explain in detail that before the correct installation and installation, if the center distance between the two axles is an adjustable structure, the center distance should be shortened first, and then the center distance should be adjusted as required after the tape is installed; if the center distance between the two axles is adjustable. If it is not adjustable, you can put a V-belt into the wheel groove first, then turn the other pulley to install the V-belt, and install a set of V-belts in the same way. During installation, it is forbidden to use tools to pry or pull the V-belt hard to prevent the V-belt from being stretched or being too loose or too tight.